Home › Subcontractor Compliance Map › Iowa

Iowa Subcontractor Compliance

Last researched: October 22, 2026

Starting out as a subcontractor in Iowa, or taking your first job there? These are the rules to know. Licensing: State contractor registration (Iowa Division of Labor); electrical and plumbing/mechanical licensed separately. Lien deadline: 90 days after last work for full protection. Private-work retainage: No statutory cap. Workers' compensation: Most employers; no minimum employee count stated. Of the 8 subjects below, 0 come from official sources and 8 from secondary sources.

This information is operational guidance, not legal advice. Statutes change and have exceptions. Confirm deadlines with the state agency or an attorney before relying on them for a specific project.

Iowa license Secondary source, verify before relying

State contractor registration (Iowa Division of Labor); electrical and plumbing/mechanical licensed separately

Per Procore: electrical via Electrical Examining Board (State Fire Marshal); plumbing/HVAC via Plumbing and Mechanical Systems Board (Dept of Public Health). $25,000 bond, $50 fee for registration.

Source: https://www.procore.com/library/iowa-contractors-license

Get a compliance audit for your company →

Iowa license threshold Secondary source, verify before relying

Registration required for work over $2,000 per year

Source wording varies between 'over $2,000' and 'at least $2,000'. Confirm with Iowa Workforce Development.

Source: https://www.procore.com/library/iowa-contractors-license

Get a compliance audit for your company →

Iowa preliminary notice Secondary source, verify before relying

Not required for first-tier subs; lower-tier must notify GC within 30 days

Iowa Code 572.33: one-time written notice to GC within 30 days of first furnishing (commercial, sub-to-sub). Residential requires registry posting (572.13B). Per Siteline.

Source: https://www.siteline.com/mechanics-lien-rights/iowa

Get a compliance audit for your company →

Iowa lien deadline Secondary source, verify before relying

90 days after last work for full protection

Iowa Code 572.8-572.10. Later filing up to 2 years and 90 days allowed but limited to unpaid owner funds with extra notice. Enforce within 2 years and 90 days (572.28).

Source: https://www.siteline.com/mechanics-lien-rights/iowa

Get a compliance audit for your company →

Iowa prompt pay Secondary source, verify before relying

No private prompt payment statute

Iowa has no prompt payment provisions for private projects (Levelset). Iowa Code 573.12 (7 days after GC paid) applies to public works only.

Source: https://www.levelset.com/prompt-payment/iowa-prompt-payment-law/

Get a compliance audit for your company →

Iowa retainage (private work) Secondary source, verify before relying

No statutory cap

Iowa has no private-project retainage statute; contract controls (Levelset).

Source: https://www.levelset.com/retainage/iowa-retainage-faqs/

Get a compliance audit for your company →

Iowa retainage (public work) Secondary source, verify before relying

5% max of each progress estimate (and for subs)

Iowa Code 573.12, 573.13 (Levelset). Release 30 days after completion and acceptance; contractor passes retainage to subs within 7 days.

Source: https://www.levelset.com/retainage/iowa-retainage-faqs/

Get a compliance audit for your company →

Iowa workers' compensation Secondary source, verify before relying

Most employers; no minimum employee count stated

Mosey says 'most businesses'; GoCo lists 1+. Threshold unconfirmed; treat as 1+ pending official IWC check.

Source: https://mosey.com/blog/workers-compensation-insurance-requirements-by-state/

Get a compliance audit for your company →

More compliance information

Neighboring states

Get a compliance audit for your company